Samsung SRP-250 Series Manual Do Utilizador

                                 

23

Chapter 8. Control Commands 

 

 

[Name] The name of the command. 

 [Format] The code sequence. 
  ASCII indicates the ASCII equivalents. 
  Hex indicates the hexadecimal equivalents. 
  Decimal indicates the decimal equivalents. 
                  [ ] k indicates the contents of the [ ] should be repeated  
  k times. 
 [Range] Gives the allowable ranges for the arguments. 
 [Description] Describes the function of the command. 

 

 

LSB Least Significant Bit 

 
 
HT 

 [Name] Horizontal tab. 
 [Format] ASCII HT 
  Hex 09 
  Decimal 9 
 [Description] Moves the print position to the next horizontal tab position. 
 
 
LF 

 [Name] Print and line feed. 
 [Format] ASCII LF 
  Hex 0A 
  Decimal 10 
 [Description] Prints the data in the print buffer and feeds one line 
  based on the current line spacing. 
 
 
CR 

 

[Name] Print and carriage return. 

 [Format] ASCII CR 
  Hex 0D 
  Decimal 13 
 [Description] This command is set according to the DIP switch 1-1 setting  
  at power-on. This command is only available with a parallel  
  interface.  
 

•

 This command prints the data in the print buffer and does not feed the paper. 

 

•

 Sets the print starting position to the beginning of the line.