Samsung 1740 Manual Do Utilizador

S

OLVING

 P

ROBLEMS

6.15

Background scatter results from bits of toner distributed on 
the printed page. 
• The paper may be too damp. Try printing with a different 

batch of paper. Do not open packages of paper until 
necessary so that the paper does not absorb too much 
moisture.

• If background scatter occurs on an envelope, change the 

printing layout to avoid printing over areas that have 
overlapping seams on the reverse side. Printing on seams 
can cause problems.

• If background scatter covers the entire surface area of a 

printed page, adjust the print resolution through your 
software application or the printer properties.

• If characters are improperly formed and producing hollow 

images, the paper stock may be too slick. Try a different 
paper. See “Paper Specifications” on page 7.25.

• If characters are improperly formed and producing a wavy 

effect, the scanner unit may need service. Verify that it 
also occurs on a demo page by pressing the Cancel 
button on the control panel when the printer is ready. For 
service, contact a service representative.

• Check the paper type and quality. See “Paper 

• Ensure that the paper or other material is loaded correctly 

and the guides are not too tight or too loose against the 
paper stack.

• Check the paper type and quality. Both high temperature 

• Turn over the stack of paper in the input tray. Also try 

rotating the paper 180° in the input tray.

• Push the output lever and try printing to the face up 

output slot.