Samsung 1740 Manual Do Utilizador

I

NTRODUCTION

1.7

If the On Line/Error and Toner Save LEDs blink, your 
system has some problems. To solve the problem, see 
“Troubleshooting Error Messages” on page 6.18.

In Ready mode, press and hold this button for about 2 
seconds until all LEDs blink slowly, and release. 

Press this button each time you load a sheet of paper in the 
manual feeder, when you select Manual Feed for Source 
from your software application. For detailed information, 
see “Using the Manual Feeder” on page 3.8. 

In Ready mode, press and hold this button for about 10 
seconds until all LEDs turn on, and release. After cleaning 
the printer, one cleaning sheet is printed.

Press this button during printing. The On Line/Error LED 
blinks while the print job is cleared from both the printer 
and the computer, and then return to Ready mode. This 
may take some time depending on the size of the print job. 

In Manual Feed mode, you can’t cancel the print job by 
pressing this button. For detailed information, see “Using 
the Manual Feeder” on page 3.8. 

In Ready mode, press this button to turn the Toner Save 
mode on or off. 
For detailed information, see page 4.8.