Printronix P5000LJ Manual Do Utilizador
Changing The Frame Type (NDS & Bindery)
225
Changing The Frame Type (NDS & Bindery)
The NIC allows the user to store a particular frame type for the unit to adhere
to in a Novell environment.
to in a Novell environment.
HTML Method
1.
Load a Web browser on a network station that can communicate with the
print server over TCP/IP.
print server over TCP/IP.
2.
Direct your Web browser to URL:
http://P5000LJIPaddress/networkConf.html
(e.g.,
http://192.75.11.9/networkConf.html
)
3.
Look under the “Novell” section and go to the “Frame Type” field to select
the appropriate frame type.
the appropriate frame type.
4.
Click on the SUBMIT button when done and physically re-power the
printer to make the new settings take effect.
printer to make the new settings take effect.
Manual (Telnet) Method
1.
Telnet to the print server. This will bring up a login screen:
telnet ipaddress
2.
You should now see a prompt displayed that has the NIC’s IP address
followed by a colon then
followed by a colon then
root
.
ipaddress:root>
3.
At the prompt, enter:
store pserver novell frametype [ethernet2 | 802.3
|802.2 |802.2snap | autosense]
|802.2 |802.2snap | autosense]
4.
Reset the unit to make the changes take effect.
reset
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.
default.
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.
default.