Ricoh SP 3510DN Manual Do Utilizador
The address will be detected by the printer.
9.
Press the [Menu] key.
10.
If you are requested to restart the printer, turn off the printer, and then turn it back on.
11.
Print a configuration page to confirm the settings made.
Setting the Ethernet Speed
You can set the speed that the printer will use for Ethernet communication. For normal usage, the default
setting [Auto Select] is suitable and does not need to be changed. This setting allows two connected
interfaces to automatically determine the optimum speed that they will communicate at.
setting [Auto Select] is suitable and does not need to be changed. This setting allows two connected
interfaces to automatically determine the optimum speed that they will communicate at.
Router/HUB
Printer
[10Mbps
Half D.]
[10Mbps Full
D.]
[100Mbps
Half D.]
[100Mbps
Full D.]
[Auto Select]
10Mbps Half
Duplex
Duplex
10Mbps Full
Duplex
Duplex
100Mbps Half
Duplex
Duplex
100Mbps Full
Duplex
Duplex
auto-
negotiation
(auto selection)
negotiation
(auto selection)
• Connection cannot be established if the selected Ethernet speed does not match your network's
transmission speed.
• The use of this feature is recommended. To use it, select [Auto Select].
Ethernet Configuration
51