Ricoh SP 311DNw Manual Do Utilizador

Error and Status Messages Appear on Smart

Organizing Monitor

Message

Causes

Solutions

No Response from
I/O Device
Check the cable,
power cord, and
main switch.

• The power cable of the

machine is not plugged in.

• The power of the machine

is not turned ON.

• The USB cable is not

connected.

• Check the printer power cord.
• Check the printer power switch is on.
• Check the USB cable is properly

connected.

Tray Not Detected or
No Paper
The indicated paper
source tray is not set
properly, or no
paper loaded.
Check the indicated
tray.

Tray 1 has run out of paper.
The bypass tray has run out of
paper.

Tray 1 Jam
Bypass Tray Jam
Duplex Jam
Inner Jam
Outer Jam
Total Jam

A paper jam has occurred in the
machine.

Paper Size Mismatch
Paper of the selected
paper size is not
loaded in the
indicated paper
source tray.
Check the indicated
tray.

The paper size specified on the
machine and the size specified
in the printer driver do not
match.

For details about specifying the paper size
setting on the machine, see page 30
"Loading Paper". For details about
changing the paper size setting in the
printer driver, see the printer driver Help.

6. Troubleshooting