Ricoh DDP 70 Manual Do Utilizador
Troubleshooting 5-15
Booklet Finisher Error Codes (Option)
When Invalid Booklet #xx or Invalid
Folder
#xx
is displayed on the
OCP, cancel the job and remove any remaining paper. Refer to the applicable error code
in the table below for a description of the problem. Resubmit the job after taking the
appropriate corrective action.
in the table below for a description of the problem. Resubmit the job after taking the
appropriate corrective action.
The following paper sizes and weights can be used when creating a booklet to be
Saddle Stitched.
Saddle Stitched.
Paper Size:
B5 (SEF), A4 (SEF), B4 (SEF), A3 (SEF), Letter (SEF), Folio (SEF), Legal (SEF),
Ledger (SEF), and Custom Size.
B5 (SEF), A4 (SEF), B4 (SEF), A3 (SEF), Letter (SEF), Folio (SEF), Legal (SEF),
Ledger (SEF), and Custom Size.
Custom Size:
Leading Edge (Width): 8.27 inch (210.0 mm) to 12.0 inch (304.8 mm).
Side Edge (Length): 7.2 inch (182.0 mm) to 18.0 inch (457.2 mm).
Leading Edge (Width): 8.27 inch (210.0 mm) to 12.0 inch (304.8 mm).
Side Edge (Length): 7.2 inch (182.0 mm) to 18.0 inch (457.2 mm).
Paper Weight:
Bond: 16 to 53 lb (60 to 199 g/m
Bond: 16 to 53 lb (60 to 199 g/m
2
).
Index: 90 to 110 lb (163 to 199 g/m
2
).
Error Code
(#xx)
Description
#01
Single sheet booklet required.
#02
Mixed paper sizes requested in booklet.
#03
Uncollated set booklet required.
#04
Booklet
The print job is over 16 sheets or the thickness of the paper is over 1.7 mm.
Folding
The print job is over 3 sheets or the thickness of the paper is over 0.3 mm.
The print job is over 16 sheets or the thickness of the paper is over 1.7 mm.
Folding
The print job is over 3 sheets or the thickness of the paper is over 0.3 mm.
#05
FaceUp requested.
#10
Insert tray requested without Publishing Finisher present.
#11
Saddle Stitch requested without Publishing Finisher present.
#12
Invalid request for transparencies or labels in booklet.
#13
Invalid custom paper code requested for booklet.
#14
Unsupported paper code requested for booklet.
#15
Incorrect stacker requested for booklet (must be Booklet Stacker or AUTO).
#16
Incorrect stacker requested for Saddle Stitch booklet.
#17
Trimming requested without Booklet Stacker and Saddle Stitch.
#18
Tab Stock paper requested from an inserter tray.