Ricoh LDD280 Manual Do Utilizador

Troubleshooting

132

x Clearing Misfeeds

R CAUTION:

❒ After clearing misfeeds, make sure

that all the doors, covers, and units
are closed and the x indicator is
off.

❒ To prevent misfeeds, do not leave

any torn scraps of paper, originals,
or masters in the machine.

❒ When clearing misfeeds, do not

turn off the main switch. If you do,
your print settings will be cleared.

❒ The master eject unit or the drum

unit may be locked if the security
mode is active. Enter the security
code or ask your administrator if
necessary.

❒ If misfeeds occur repeatedly, con-

tact your service representative.

“x + A” Paper Misfeeds in the 
Paper Feed Section

A

-To prevent paper misfeeds:

Check the following before restarting
the printing run.
• Did you select an appropriate pa-

per type with [Feed Tray Paper
Type]

?

• Are the side pads in the correct po-

sitions?

To print on thin paper (47.1 g/m

2

,

12.5 lb), slide the levers behind the
paper feed side plates in the direc-
tion of the arrow (see illustration).

• When paper is curled, correct as

shown.

• Be careful not to cut yourself on 

ZDCY140E

GRCURL0E