Ricoh LDD280 Manual Do Utilizador
Settings You Can Change with User Tools
157
5
❖ No.of ldling Rotations: Quality Start
When you use the Quality Start
mode, you can select how many
times the drum unit idles.
mode, you can select how many
times the drum unit idles.
Note
❒ Default: 7 times
❖ Deflector Angle
You can change the angle of the
wing guide depending on the pa-
per type you use.
• Up (Select this setting when
wing guide depending on the pa-
per type you use.
• Up (Select this setting when
standard thickness or thin pa-
per misfeeds at the paper exit
section occur frequently.)
per misfeeds at the paper exit
section occur frequently.)
• Down (Select this setting when
A4 – B5 JIS, 8
1
/
2
" × 11" thick pa-
per is not delivered properly to
the paper delivery tray.)
the paper delivery tray.)
Note
❒ Default: Auto
❖ Auto Class
Instead of using the Separate
mode, you can make the following
settings:
• Start Automatically (After the
mode, you can make the following
settings:
• Start Automatically (After the
last page of each printing set is
fed out to the paper delivery
tray, the machine stops for a few
seconds. Then, the next cycle
begins.)
fed out to the paper delivery
tray, the machine stops for a few
seconds. Then, the next cycle
begins.)
• Stop (After the last page of each
printing set is fed out to the pa-
per delivery tray, the machine
stops. If you press the {Start}
key, the next cycle begins.)
per delivery tray, the machine
stops. If you press the {Start}
key, the next cycle begins.)
Note
❒ Default: Stop
❖ Master/Ink Remaining Volume
Specifies whether you can check
the amount of ink and master.
• [Off] (You cannot check the re-
the amount of ink and master.
• [Off] (You cannot check the re-
maining amount of ink or mas-
ter.)
ter.)
• [On (Below half)] (When the re-
maining amount of ink or mas-
ter is less than half, the display
panel indicates these amounts
when you turn on the main
switch.)
ter is less than half, the display
panel indicates these amounts
when you turn on the main
switch.)
Note
❒ Default: Off
❖ Paper Type
You can select the paper type.
Note
❒ Default: Standard
❖ Paper Type: User1–2
You can register a frequently used
paper type and have it shown on
the paper type menu as [User 1] or
[User 2]
paper type and have it shown on
the paper type menu as [User 1] or
[User 2]
.
Note
❒ Default: Standard: No Feed
A
Select the paper type.
• Standard: “No feed” “Dou-
• Standard: “No feed” “Dou-
ble feed”
• Thick Paper: “No feed” “Dou-
ble feed” “Medium”
B
Press [OK].