Ricoh LDD280 Manual Do Utilizador
Printing Preparations
39
2
C
Loosen the screw for the end plate,
adjust it to the paper size, and then
tighten the screw to lock the end
plate.
adjust it to the paper size, and then
tighten the screw to lock the end
plate.
Note
❒ Align the screw with the appro-
priate paper size mark.
Printing on Paper Smaller than B6 JIS
A
Move the side guides outward.
B
Loosen the screw for the end plate,
move it as close to the machine as
possible, and then tighten the
screw to lock the end plate.
move it as close to the machine as
possible, and then tighten the
screw to lock the end plate.
Printing on 81.4 g/m
2
(21.6 lb.) or Heavier
Paper
A
Lower the paper alignment wings.
Note
❒ Depending on the type of paper
that you are using, you might
not be able to use the full capac-
ity (3000 sheets) of the LCOT
when the wings are lifted.
not be able to use the full capac-
ity (3000 sheets) of the LCOT
when the wings are lifted.
❒ Lift the paper alignment wings
when B5 JISKL or A4K prints
are delivered curled up.
are delivered curled up.
ABQ020S
AJK162S
AJK163S
ABQ023S