Ricoh IS 2235 Manual Do Utilizador
Getting Started
24
1
Turning On the Power
A
Press the operation switch.
The On indicator goes on.
The On indicator goes on.
Note
❒ If the power does not come on
when the operation switch is
pressed, check the main power
switch is on. If it is off, turn it on.
pressed, check the main power
switch is on. If it is off, turn it on.
Turning Off the Power
A
Make sure the exposure glass cov-
er or the ADF is in the right posi-
tion.
er or the ADF is in the right posi-
tion.
B
Press the operation switch.
The On indicator goes off.
The On indicator goes off.
Note
❒ Even if you press the operation
switch, the indicator does not
go out, but blinks in the follow-
ing cases:
• When the exposure glass cov-
go out, but blinks in the follow-
ing cases:
• When the exposure glass cov-
er or ADF is open.
• During communication with
external equipment.
• When the hard disk is active.
• If a file is waiting to be trans-
• If a file is waiting to be trans-
m i t t e d w i t h i n t h e n e x t
minute using the “Send Lat-
er” facsimile function.
minute using the “Send Lat-
er” facsimile function.
Turning Off the Main Power
Important
❒ Do not turn off the main power
switch when the On indicator is lit
or blinking. Doing so may result in
damage to the hard disk or memo-
ry.
or blinking. Doing so may result in
damage to the hard disk or memo-
ry.
❒ Make sure to turn off the main
power switch before pulling out
the power plug. Not doing this
may result in damage to the hard
disk or memory.
the power plug. Not doing this
may result in damage to the hard
disk or memory.
A
Make sure the On indicator is not
lit.
lit.
B
Open the switch cover, and then
turn off the main power switch.
The main power indicator goes
out.
turn off the main power switch.
The main power indicator goes
out.
AdonisC4-AE_zen_F_FM_forPaper.book Page 24 Thursday, May 12, 2005 3:32 PM