Ricoh 220-240 V Manual Do Utilizador

Message List

273

❒ For details about UNIX commands and parameters, see UNIX Supplement.
❒ For details about “syslog” command, see p.246 “syslog”.

Snmp over IPX is ready.

Communication over IPX with snmp is available.

snmpd start.

The snmpd service has started.

started.

The direct print service has started.

Started.

The bonjour (rendezvous) function is enabled.

Terminated.

The bonjour (rendezvous) function is disabled.

The print server received error <error number> 
during attempt to log in to the network. Access 
to the network was denied. Verify that the print 
server name and password are correct. 

Login to the file server failed. The print server 
is not registered or a password is specified. 
Register the print server without specifying a 
password.

too many pictures.

PictBridge printing failed because too many 
image are sent during one print transacation. 
Reduce images at one print transaction.

trap account is unavailable.

v3Trap cannot be sent. This could be because 
the Trap destination account is different from 
the account specified by the printer.

usbd is disable.

Plug and Play function and printing is dis-
abled because usbd is disabled in the security 
mode.

Enable usbd in the security mode.

WINS name registration: No response to serv-
er<WINS server address>

There was no response from the WINS server. 
Check the correct WINS server address is en-
tered. Alternatively, check the WINS server is 
functioning properly. 

WINS wrong scopeID=<Scope ID> 

An invalid scope ID was used. Use a valid 
scope ID.

wpa authentication Failed

WPA authentication failed. Check the WPA 
configuration.

wpa authentication started

WPA authentication has started.

wpa IEEE802.1X started

WPA authentication has started.

wpa connecting to authenticator

WPA is connecting to authenticator.

wpa link up

WPA key exchange has finished, and commu-
nication has been terminated.

wpa probe response doesn't have IE.

WPA probe response does not have IE.

wpa success authenticated

WPA authentication was successful.

wpa success key received

WPA key reception was successful.

wpa waiting for key

Waiting for WPA key.

wpasupd start

wpasupd has started.

wpasupd stop

wpasupd has ended.