Philips 5900 Manual Do Utilizador

24

AXIS 5900 User’s Manual

7. To access the WLAN settings page, click 

Admin | Network Settings | 

Detailed View | TCP/IP Network | WLAN 

WLAN Parameters

Refer to the table below for a description of the WLAN parameter settings 

used to configure the Axis Network Print Server for wireless printing.

WLAN Parameters

Description

WLAN Node Address

The WLAN node address that is identical to the Axis Network Print 
Server serial number which is found on the underside label on the print 
server, e.g.
Ser.No: 00:40:8C:10:00:86 
WLAN Node Address: 00 40 8C 10 00 86 

WLAN Network Speed

Select the appropriate network speed according to your network 
environment or select Auto Sense

WLAN Network Mode

Select Ad Hoc mode for peer to peer printing or Infrastructure mode for 
wireless communication via an access point.
Note: The WLAN Network Mode must match the mode of the 
workstation / laptop. This is set using the computer’s wireless 
configuration software.

WLAN SSID

The default SSID (service set identifier) in the Axis Network Print Server 
is ’AXIS’ followed by the last six digits of the serial number, e.g. 
AXIS100086
Note: the SSID must match the SSID of the WLAN network interface. 
This is set using the computer’s wireless configuration software.

WLAN Channel

The default setting is channel 11 (Japan = channel 14) See 

Specifications” on page 138 for more information

WLAN Fragmentation Threshold These parameters are used to optimize the data transmission in 

accordance with the IEEE 802.11b standard.

WLAN RTS Threshold