Ricoh 2018D Manual Do Utilizador
Preparations for Use as a Network Scanner
12
2
GGGG
Repeat steps
to make other settings.
HHHH
Press the
{{{{Cancel}}}} key.
The main menu appears.
Scan Settings
This section explains how to set the
defaults for scan settings.
The scan settings consist of the fol-
lowing. For the list about settings and
defaults, see p.9 “Scanner Features”.
defaults for scan settings.
The scan settings consist of the fol-
lowing. For the list about settings and
defaults, see p.9 “Scanner Features”.
❖
❖
❖
❖ Default Scan Settings
Resolution and scan size can be set.
• Resolution
Select the resolution from 100dpi,
200dpi, 300dpi, 400dpi, or 600dpi.
200dpi, 300dpi, 400dpi, or 600dpi.
• Scan Size
Select the size of the original to be
scanned.
When [Auto Detect] is selected, the
auto detect function of the ma-
chine is used to set the original
size.
When the size is specified, scan-
ning is performed for that size, re-
gardless of the actual size of the
original. The following sizes can be
selected:
A3
scanned.
When [Auto Detect] is selected, the
auto detect function of the ma-
chine is used to set the original
size.
When the size is specified, scan-
ning is performed for that size, re-
gardless of the actual size of the
original. The following sizes can be
selected:
A3
S, A4R, A4S, A5R, A5S, 11
× 17S, 8
1
/
2
× 14S, 8
1
/
2
× 13S,
8
1
/
2
× 11R, 8
1
/
2
× 11S, 5
1
/
2
×
8
1
/
2
R, 5
1
/
2
× 8
1
/
2
S, B4 JISS
(Japanese Industrial Standard), B5
JIS
JIS
R, B5 JISS, Custom size
Note
❒ When [Custom Size] is selected,
the dimensions of the scan area
(width and height) can be speci-
fied.
(width and height) can be speci-
fied.
❒ When selecting [Custom Size] for
[Scan Size]
❖
❖
❖
❖ Original Setting
Note
❒ This setting is available only
when you have installed the op-
tional ADF capable of scanning
both sides of a sheet (ARDF).
tional ADF capable of scanning
both sides of a sheet (ARDF).
Set the default for whether origi-
nals are one-sided or two-sided
and if two-sided, the relationship
between those sides. When the
originals are always the same, set
this for the default to make opera-
tion easier. You can select [1 Sided
Original]
nals are one-sided or two-sided
and if two-sided, the relationship
between those sides. When the
originals are always the same, set
this for the default to make opera-
tion easier. You can select [1 Sided
Original]
, [2 sided Orig.(T toT
)]
(Top to Top), or [2 Sided Orig.(To
toB
toB
)]
(Top to Bottom).
❖
❖
❖
❖ Mixed Orig. Sizes Priority
This setting determines whether
the original size is to be automati-
cally detected when originals of
different sizes are inserted in the
ADF. You can select [On] or [Off].
the original size is to be automati-
cally detected when originals of
different sizes are inserted in the
ADF. You can select [On] or [Off].
Note
❒ If the original size is specified
when scanning, this setting is
ignored.
ignored.
❒ When [Off] is selected, [Auto De-
tect]
is selected for [Scan Size],
and originals of different sizes
are placed in the ADF, the max-
imum size of the originals is de-
tected as the scan size.
are placed in the ADF, the max-
imum size of the originals is de-
tected as the scan size.