Ricoh 2018D Manual Do Utilizador

Setting Up the Machine on a Network

28

❒ When you use the IEEE 1394 in-

terface on a network, you can-
not use the Ethernet interface in
the same domain. To use both
interfaces in the same domain,
set different values for [Sub-net
Mask:]

.

❒ The physical address (MAC ad-

dress) also appears.

❖

❖

❖

❖ WINS Configuration

You can specify the WINS server
settings.
• On

If [On] is selected, specify the
[ S e r v e r ]

  I P   a d d r e s s   a s

“xxx.xxx.xxx.xxx” (“xxx” indi-
cates a number).
If DHCP is in use, specify [Scope
ID]

.

• WINS Server:000.000.000.000
• Scope ID

• Off

❒ Enter [Scope ID] using up to 31

alphanumeric characters.

❒ Default: Off

❖

❖

❖

❖ IP over 1394

When you use the IP over 1394 func-
tion of the IEEE 1394 interface to
connect the machine to the network,
or you print from computer with
the IP over 1394 driver, you must
specify [Active]for [IP over 1394].
• Active
• Inactive

❒ Printing with IP over 1394 is pos-

sible under Windows Me/XP
and Windows Server 2003.

❒ Default: Active

❖

❖

❖

❖ SCSI print (SBP-2)

When you print using the SCSI
print client function supported by
Windows 2000, Windows XP, or
Windows Server 2003, you must
set [SCSI print (SBP-2)].
• Active
• Inactive

❒ The IEEE 1394 interface can be

used when Windows 2000 Serv-
ice Pack 1 or later is installed. If
the Service Pack is not installed,
only one SCSI print device is
connectable via 1394 bus.

❒ Default: Active

❖

❖

❖

❖ Bidirectional SCSI print

Specifies the printer's response
mode etc. for status requests when
using the IEEE 1394 interface.
• On
• Off

❒ Default: On
❒ If this is set to [Off], bidirectional

communication will not work.

❖

❖

❖

❖ Host Name

Specify the host name.

❖

❖

❖

❖ Domain Name

Specify the domain name.