Paxar 9840CL Manual Do Utilizador

••

The Operator's Handbook is for the person who prints and applies labels.

After you unpack the printer, you should have:  a 9840CL printer, power cord,
communication cable and a ribbon take-up core (may already be on take-up reel).

Keep the box and packaging material in case the printer ever needs repair.

Power cords are not supplied with 230-volt printers.  You need to purchase a power cord
separately.  The power cord requires IEC 320 STD C13 end finish for the printer interface
and it must meet requirements for 1.6 Amps at 115VAC and 1 Amp at 230VAC.

To connect the power cable:

1. Plug the power cable into the socket.

Plug the other end of the cable into a
grounded electrical outlet.

2. Turn on the printer.  Press ( I ) to turn on

and ( O ) to turn off the printer.

For information about replacing the fuse,
see Chapter 4, "Care and Maintenance."

Power Cable
goes here