Lexmark MX810dfe Manual Do Utilizador

To access the menu, navigate to either of the following:

Network/Ports > Standard Network > Standard Network Setup > Reports

Network/Ports > Network [x] > Network [x] Setup > Reports

Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.

To access the menu, navigate to either of the following:

Network/Ports > Standard Network > Standard Network Setup > Network Card

Network/Ports > Network [x] > Network [x] Setup > Network Card

Connected
Disconnected

View the connection status of the wireless network adapter.

View the speed of an active wireless network adapter.

UAA
LAA

View the network addresses.

Job Timeout
0, 10–225 seconds

Set the amount of time it takes for a network print job to be canceled.

“90 seconds” is the factory default setting.

A setting value of 0 disables the timeout.

If a value between 1 and 9 is selected, then Invalid appears on the
display, and the value is not saved.

Off
On

Allow the printer to print a banner page.

Note: Off is the factory default setting.

To access the menu, navigate to either of the following:

Network/Ports > Standard Network > Standard Network Setup > TCP/IP

Network/Ports > Network [x] > Network [x] Setup > TCP/IP

Note: This menu is available only in network printers or printers attached to print servers.

Set the current TCP/IP host name.

Note: This can be changed only from the Embedded Web Server.

Understanding the printer menus

175