Lexmark X748de Manual Do Utilizador
To install a printer hard disk onto the ISP:
a
Using a flathead screwdriver, loosen the screws.
b
Remove the screws attached to the printer hard disk mounting bracket, and then remove the bracket.
c
Install the printer hard disk onto the ISP:
1
Hold the edges of the printed circuit board assembly, and then align the standoffs of the printer hard disk
to the holes in the ISP.
to the holes in the ISP.
2
Press down on the printer hard disk until the standoffs are in place.
Warning—Potential Damage: Do not press on the center of the printer hard disk. Doing so may cause damage to
the hard disk.
the hard disk.
d
Insert the plug of the printer hard disk interface cable into the receptacle of the ISP.
Note: The plugs and receptacles are color
‑coded.
Additional printer setup
38