Lexmark 5016-001 Manual Do Utilizador
Diagnostic Aids
3-1
5016-001
3. Diagnostic Aids
This chapter explains the tests and procedures to identify printer
failures and verify repairs have corrected the problem.
failures and verify repairs have corrected the problem.
The following diagnostic aids can be initiated at POR by pressing
certain button sequences. These tests are also available in
Diagnostic Mode. Refer to
certain button sequences. These tests are also available in
Diagnostic Mode. Refer to
.
Print Quality Test Pages
To run the Print Quality Test Pages:
1. Turn the printer off.
2. Press and hold Select and Return, while turning on the printer.
3. Release the buttons once “Performing the Self Test” displays.
4. After POR completes, the CONFIG Menu displays.
5. Select Prt Quality Pgs from the menu; one copy of the test
page prints.
Paper Jam Sequence
, for
additional information.
Paper Jam 201 - Indicates media is jammed between the paper
pass sensor and the paper exit sensor.
pass sensor and the paper exit sensor.
•
Open the front cover to access the area of the paper jam.
Notice the location of the paper jam.
Notice the location of the paper jam.
•
Determine if media jammed prior to activating the paper pass
sensor in the printer. The paper pass sensor may not be
detecting media over the sensor, or media may be arriving late.
sensor in the printer. The paper pass sensor may not be
detecting media over the sensor, or media may be arriving late.
•
If the paper is jamming at, or over the paper exit sensor, the
paper exit sensor may be failing. Go to the
paper exit sensor may be failing. Go to the
.