Lexmark MS312dn Laser Printer Manual Do Utilizador

Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and supplies,
may cause damage to your printer.

Note: You may need to perform this task after every few months.

Warning—Potential Damage: Damage to the printer caused by improper handling is not covered by the printer
warranty.

Make sure that the printer is turned off and unplugged from the electrical outlet.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the printer,
unplug the power cord from the electrical outlet and disconnect all cables from the printer before
proceeding.

Remove paper from the standard bin and multipurpose feeder.

Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

Dampen a clean, lint-free cloth with water, and use it to wipe the outside of the printer.

Warning—Potential Damage: Do not use household cleaners or detergents to prevent damage to the exterior
of the printer.

Make sure all areas of the printer are dry before sending a new print job.

Open a Web browser, and then type the printer IP address in the address field.

View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.

If you are using a proxy server, then temporarily disable it to load the Web page correctly.

Click Device Status.

Depending on your printer model, navigate to either of the following:

 > Reports > 

 > Device Statistics > 

Note: You can view the status of parts and supplies in the “Supply Information” section of the pages
printed.

 > Status/Supplies > 

 > View Supplies > 

Maintaining the printer

148