Lexmark MS312dn Laser Printer Manual Do Utilizador

Before you begin, make sure that:

A wireless network adapter is installed in the printer and is working properly. For more information, see the
instruction sheet that came with the adapter.

The Ethernet cable is disconnected from the printer.

Active NIC is set to Auto. To set this to Auto, from the control panel, navigate to:

 > Settings > 

 > Network/Ports > 

 > Active NIC > 

 > Auto > 

Note: Turn off the printer, wait for at least five seconds, and then turn on the printer.

From the control panel, navigate to:

 > Settings > 

 > Network/Ports > 

 > Network [x] > 

 > Network [x] Setup > 

 > Wireless > 

 >

Wireless Connection Setup > 

Select a wireless connection setup.

Search for networks

Show available wireless connections.

Note: This menu item shows all broadcast secured or unsecured SSIDs.

Enter a network name Manually type the SSID.

Wi

‑Fi Protected Setup Connect the printer to a wireless network using Wi‑Fi Protected Setup.

Follow the instructions on the printer display.

‑Fi Protected Setup

Before connecting the printer to a wireless network, make sure that:

The access point (wireless router) is Wi

‑Fi Protected Setup (WPS) certified or WPS‑compatible. For more

information, see the documentation that came with your access point.

A wireless network adapter installed in your printer is attached and working properly. For more information, see
the instruction sheet that came with the wireless network adapter.

From the printer control panel, navigate to:

 > Network/Ports > 

 > Network [x] > 

 > Network [x] Setup > 

 > Wireless > 

 > Wi

‑Fi Protected

Setup > 

 > Start Push Button Method > 

Follow the instructions on the printer display.

Additional printer setup

22