Yamaha RXV3000RDS Manual Do Utilizador

29

Both AM and FM indoor antennas are included with this unit. These antennas should provide sufficient signal strength in most situations.
However, a properly installed outdoor antenna provides clearer reception. If you experience poor reception quality using the indoor antennas,
an outdoor antenna may improve the reception.
Connect each antenna as shown below.

L

L

R

L

R

R

CAUTION

SEE INSTRUCTION MANUAL FOR 

TUNER

Ω

AM
ANT

–   GND

■

Connect the included indoor antenna to the 75

Ω

 

 terminal.

■

Consult your dealer or authorized service center about the
best method of selecting and erecting outdoor antennas.

■

Press the tab to unlock the terminal hole.

Insert the AM loop antenna lead wires to the 

 and 

 terminals.

Lift the tab to its original position to lock the lead wires.

Lightly pull on the lead wires to confirm a good connection.

Attach the loop antenna to the antenna stand.

Orient the AM loop antenna so that the best reception is obtained.

•  The AM loop antenna should be placed away from this unit. The antenna may be

hung on a wall.

•  The AM loop antenna should remain connected, even if an outdoor AM antenna is

connected to this unit.

•  To minimize the influence of automobile ignition noise, locate the antenna as far

from heavy traffic as possible.

•  Keep the ribbon cable or coaxial cable as short as possible.

    Do not bundle or roll up excess cable.

•  The antenna should be at least 1.8m (6 feet) from reinforced concrete walls and

metallic structures.

Indoor FM antenna (included)

AM loop antenna (included)

Ground

Loop Antenna

Antenna stand