Lexmark 25A0591 Manual Do Utilizador

Close the front door.

Check the printer control panel to see if it is clear of messages.

Repeat as needed for additional toner cartridge replacement.

There are three different display messages that may appear when a photoconductor replacement is necessary: 84
Replace <color> photoconductor

, 84 <color> photoconductor nearly low, or 84 <color>

.

Note: A replacement photoconductor can be used with any color.

Replacing a photoconductor is a two

‑part process. First, complete the illustrated steps to replace the photoconductor,

and then reset the life count and clear printer messages.

Open the front door.

Warning—Potential Damage: To avoid overexposing the photoconductors , do not leave the door open for
more than 10 minutes.

Pull the specified photoconductor up, and then slide it to the right to remove it from the printer.

Maintaining the printer

138