Lexmark W850DN Manual Do Utilizador
Installing optional trays
The printer supports the following optional input sources:
•
2 Tray Module (two 500
‑sheet trays)
•
2,000
‑sheet dual input trays
•
2,000
‑sheet high capacity feeder
•
Duplex unit
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
trained personnel to lift it safely.
CAUTION—SHOCK HAZARD: If you are installing an optional tray after setting up the printer, then turn the
printer off and unplug the power cord, the USB cable, and the Ethernet cable before continuing.
printer off and unplug the power cord, the USB cable, and the Ethernet cable before continuing.
1
Unpack the optional tray, and remove all packing material.
2
Place the tray in the location chosen for the printer.
Note: If you are installing more than one optional tray, the 2,000
‑sheet dual input trays must always be installed
as the first optional trays (configuring from the bottom up).
Note: The optional 500
‑sheet trays and optional 2,000‑sheet dual input trays are interchangeable.
1
2
3
4
1
2
3
4
1
Tray 3 and Tray 4 (500-sheet trays or 2,000-sheet dual input trays)
2
Tray 1 and Tray 2 (500-sheet trays)
3
Tray 5 (2,000-sheet high capacity feeder)
4
Duplex unit
Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down.
Additional printer setup
25