Konica Minolta 752 Manual Do Utilizador
3-3.Shut-down Operation
DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 9
•
When START TIMER is set to ON;
If START TIMER is set to ON, when you touch [OPERATION
OFF] on the normal screen, the time at which the DRYPRO
goes into the READY status for the next time appears on the
confirm screen on the right.
OFF] on the normal screen, the time at which the DRYPRO
goes into the READY status for the next time appears on the
confirm screen on the right.
(1) Touch [OK] to perform OPERATION OFF proce-
dure.
Touching [CANCEL] will go back to the normal screen.
When START TIMER is set to ON, the device will not turn off,
and go into the standby mode.
In the standby mode, the backlight of the control panel fades
out with the time to go to READY for next time displayed.
[CANCEL] will appear after a lapse of certain time after the
device goes into the standby mode.
When START TIMER is set to ON, the device will not turn off,
and go into the standby mode.
In the standby mode, the backlight of the control panel fades
out with the time to go to READY for next time displayed.
[CANCEL] will appear after a lapse of certain time after the
device goes into the standby mode.
Operation OFF message
(Start Timer ON)
Standby mode message
IMPORTANT
• Touch [CANCEL] on the screen on which the
standby mode message appears if you wish to
make printing in the standby mode. The con-
firm message on the lower-right appears,
touch [OK] to restart the device.
make printing in the standby mode. The con-
firm message on the lower-right appears,
touch [OK] to restart the device.
• [CANCEL] will appear after a lapse of certain
time (approx. 2 minutes) after the device goes
into the standby mode.
into the standby mode.
• When you use the START TIMER function,
leave the breaker of the device ON after
OPERATION OFF procedure is made. (Refer
to
OPERATION OFF procedure is made. (Refer
to
TIMER function.)
Restart confirm message
Ver.0.12 2002.7