Savin LF515e Manual Do Utilizador
Key Operator Settings
178
7
-
-
-
-The Message Displayed While
the Heater is Turned Off
While the Night Timer is activated
and the heater is turned off, the mes-
sage "
and the heater is turned off, the mes-
sage "
Currently the machine is
in Energy Saver Mode. Press
[Clear Modes/Energy Saver] key
to use functions.
" appears on the
display.
Press
{{{{Clear Modes/Energy Saver}}}} key
to inactivate the Night Timer tempo-
rarily and print the received fax mes-
sages if there are any.
Then, if no operation is performed for
about 5 minutes, the Night Timer
turns the heater off again.
rarily and print the received fax mes-
sages if there are any.
Then, if no operation is performed for
about 5 minutes, the Night Timer
turns the heater off again.
User Parameters
The User Parameters allow you to customize various settings to match your
needs.
Set the switches of each parameter to a new value to make changes to the set-
tings.
needs.
Set the switches of each parameter to a new value to make changes to the set-
tings.
Preparation
Some User Parameters require installation of optional equipment or opera-
tions such as turning a function on or off before changing the switch values.
Some User Parameters require installation of optional equipment or opera-
tions such as turning a function on or off before changing the switch values.
❖
❖
❖
❖ Switches and Bits
Each User Parameter has a set of switches, and each of the switches consists
of eight bits, whose values are "0" or "1". The right most bit is bit 0 and the left
most is bit 7. You can adjust the settings to match your needs by switching the
value of bits between "0" and "1".
of eight bits, whose values are "0" or "1". The right most bit is bit 0 and the left
most is bit 7. You can adjust the settings to match your needs by switching the
value of bits between "0" and "1".
Note
❒ The diagram above describes the change of setting for bit 6 of switch 00 from
"0" (Memory Transmission) to "1" (Immediate Transmission).
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Switch 00
0
0
0
0
0
0
0
0
↓
↓
↓
↓
↓
↓
↓
↓
0
1
0
0
0
0
0
0