Savin SLP38C Manual Do Utilizador
Replacing the Fuser Oil Unit
7
1
G
Holding the green handle, pull
up the Fusing Unit slowly in the
direction of the arrow.
up the Fusing Unit slowly in the
direction of the arrow.
Important
❒ Do not touch any areas other
than the handle.
H
Put the removed Fusing Unit in a
stable and level place.
stable and level place.
I
Lift the Fuser Oil Unit in the di-
rection of the arrow to remove it,
and put it in a stable and level
place.
rection of the arrow to remove it,
and put it in a stable and level
place.
Important
❒ Do not touch inside of the Fus-
ing Unit.
❒ Be careful no to touch the area
other than the shown in the il-
lustration.
lustration.
J
Take out the Fuser Oil Unit from
the bag, and remove seal (
the bag, and remove seal (
A
A
A
A), and
then remove seal (
B
B
B
B) as shown in
the illustration.
Note
❒ Be sure to remove seal (A), and
then pull it out in a level man-
ner.
ner.
Important
❒ Be sure to remove the seals to
avoid printer malfunction.
❒ Be sure to remove seal (A) first,
and then remove seal (
B) to
avoid oil leak.
❒ Be sure to put the Fuser Oil Unit
in a stable and level place to
avoid oil leak.
avoid oil leak.
❒ There is oil on the removed
seals and fuser oil roller. Be
careful not to let them come in
contact with your clothes.
careful not to let them come in
contact with your clothes.
ZDJH208J
ZDJH052E
ZDJH053J