Savin SLP38C Manual Do Utilizador
Replacing the Fusing Unit
21
1
S
Confirm that the following mes-
sage is displayed on the panel dis-
play, and then load the A3 paper
which comes with the Fusing
Unit in the Bypass Tray.
sage is displayed on the panel dis-
play, and then load the A3 paper
which comes with the Fusing
Unit in the Bypass Tray.
Set Sheet in
Bypass, then #
A Open the Bypass Tray.
B Pull out the Bypass Tray Exten-
sion, and then flip it open.
C Slide the side guides outward
(
A
A
A
A), and then load paper until
it stops with the print side up
(
(
B
B
B
B).
D Adjust the side guides to the
paper width.
Important
❒ Be sure to shuffle the paper
before loading the stack onto
the tray so multiple sheets
are not fed in at one time.
the tray so multiple sheets
are not fed in at one time.
T
Confirm that the A3 paper which
comes with the Fusing Unit is in
the Bypass Tray, and then press
comes with the Fusing Unit is in
the Bypass Tray, and then press
{{{{Enter}}}}.
Note
❒ It takes about a minute to start
printing.
ZDJH202J
ZDJH203J
ZDJH204J
ZDJH205J