Savin SLP38C Manual Do Utilizador
Clearing and Adjusting the Printer
32
2
Cleaning the Registration Roller
R CAUTION:
Clean the roller when replacing the
black Development Unit.
black Development Unit.
A
Turn off the power switch and
unplug the power cable.
unplug the power cable.
B
Open the right cover shown in the
illustration.
illustration.
The registration roller is set shown
in the illustration.
in the illustration.
C
Wipe around the registration roll-
er by turning with a soft damp
cloth.
er by turning with a soft damp
cloth.
Important
❒ Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
or benzene.
D
Close the right cover by pushing
the area labeled "PUSH".
the area labeled "PUSH".
E
Plug in the power cable and turn
on the power switch.
on the power switch.
• The inside of the printer be-
comes very hot. Do not touch the
parts with a label indicating the
"hot surface", otherwise it could
cause a burn.
parts with a label indicating the
"hot surface", otherwise it could
cause a burn.
ZDJH206J
ZDJH703J
ZDJH704J
ZDJP708J