Savin SLP38C Manual Do Utilizador
1
1. Replacing Consumables
and Maintenance Kit
Detaching the SR770 (2 Tray Finisher)
There are times when you might have
to detach the 2 Tray Finisher from the
printer to remove misfed paper. This
section describes how to detach the 2
Tray Finisher.
to detach the 2 Tray Finisher from the
printer to remove misfed paper. This
section describes how to detach the 2
Tray Finisher.
A
Hold the handle at the top of the 2
Tray Finisher firmly with one
hand, pull the 2 Tray Finisher
straight out, and let go when it
stops.
Tray Finisher firmly with one
hand, pull the 2 Tray Finisher
straight out, and let go when it
stops.
The 2 Tray Finisher is detached
from the printer.
from the printer.
B
Use both hands to push it straight
back in, and let go when it clicks
into place.
back in, and let go when it clicks
into place.
The 2 Tray Finisher is reattached to
the printer.
the printer.
Important
❒ Be sure to attach the 2 Tray Fin-
isher to the printer after closing
the Duplex Reversal Unit. See
P.2 “Opening and Closing the Du-
plex Reversal Unit”.
the Duplex Reversal Unit. See
P.2 “Opening and Closing the Du-
plex Reversal Unit”.
ZDJP201J
ZDJP202J