Savin C4535 Manual Do Utilizador

Key Operator Setting

108

Using this feature, you can select
messages from Specified Senders to
be printed on your machine and then
sent on to another fax machine. 
This is useful if, for example, you are
visiting another office and would like
a copy of your messages sent to that
office so you can read them.
In this section, the machines that mes-
sages are forwarded to are referred to
as Forwarding Stations. The locations
from which you would like messages
forwarded from are referred to as
Specific Senders.
You can register:
• 5 Forwarding Stations (up to 32

digits for each number) 

• 50 Specific Senders (maximum 10

per Forwarding Station, up to 20
characters each with G3 and 24
with G4)

• Wild Cards 

❒ We recommend that you print the

Forwarding/Sender list and keep
it when you register or change a re-
ceiver or sender. 

⇒ P.86 “Reports/

❒ This feature only works if the in-

coming message is from another
party that has been programmed
as a Specific Sender.

❒ The Forwarding function does not

forward messages received with
Confidential Reception, Memory
Lock, Polling Reception mode, or
messages received by Transfer Re-
quest.

❒ You cannot register a sender who

does not have an RTI or CSI.

❒ You can register up to 50 senders

for Forwarding, Special Reception
Numbers, and Authorized Recep-
tion functions. You sometimes can-
not register 50 senders depending
on the number of senders regis-
tered with other functions. 

⇒

P.115 “Treating Message from Cer-
tain Senders Differently (Specified
Senders)”, P.120 “Authorized Recep-
tion”

❒ You can print a forwarding mark

on forward messages. 

⇒ P.135

❒ To register a sender, use an RTI or

CSI. When you communicate with
a sender using G4, register the G4
TID.

❒ You can find out the RTI or CSI of

a sender by looking in the destina-
tion name column of the TCR.

❒ Before using the Forwarding func-

tion, register Forwarding Stations
and select the messages to for-
ward. 

⇒ P.90 “Initial Setup RX”

❒ You can specify whether or not to

print forwarded messages. This
feature is called “Local Printing”.
The default setting is on. 

⇒ P.130

“ C h a n g i n g   t h e   U s e r   P a r a m e -
ters”(Switch11, Bit6)

A

Us28-1.tif