Savin 1075 Manual Do Utilizador
53
5. Delivering Stored Scan Data by
the Network Delivery Scanner
Stored scan data can be sent to a specified destination using the network deliv-
ery scanner function. This chapter explains the various display screens, delivery
procedures, and how to check the delivery result when this function is used.
ery scanner function. This chapter explains the various display screens, delivery
procedures, and how to check the delivery result when this function is used.
Note
❒ A delivery server in which ScanRouter V2 Lite/Professional is installed is
necessary to use the network delivery server function. Information about de-
livery destinations and senders must be registered first into the delivery serv-
er. Also, program a connected device in [Set I/O Device] of ScanRouter V2
Administration Utility. For more information, see ScanRouter V2 Adminis-
tration Utility Help.
livery destinations and senders must be registered first into the delivery serv-
er. Also, program a connected device in [Set I/O Device] of ScanRouter V2
Administration Utility. For more information, see ScanRouter V2 Adminis-
tration Utility Help.
List Displays of Destinations and Senders
The screen configuration when using the machine as network delivery scanner
is as shown:
is as shown:
1.
[ ] Network Delivery Scanner
Icon
This icon shows that the screen for net-
work delivery scanner is displayed.
work delivery scanner is displayed.
2.
Destination Display
The selected destination is shown here. If
several destinations are selected, the des-
tinations are displayed in the order they
were selected by pressing [
several destinations are selected, the des-
tinations are displayed in the order they
were selected by pressing [
U
U
U
UPrev.] or
[
T
T
T
TNext].
Note
❒ Pressing the {{{{Check Modes}}}} key lets
you verify the selected destinations.
3.
[Registration No.]
Press this to specify a destination using a
5-digit short ID number.
5-digit short ID number.
4.
[Manual Input]
When specifying a destination that is not
listed, press [Manual Input] and enter the
destination with the soft keyboard that is
displayed. For information about send-
ing e-mail from the delivery server, see
p.2 “Manuals for This Machine”
listed, press [Manual Input] and enter the
destination with the soft keyboard that is
displayed. For information about send-
ing e-mail from the delivery server, see
p.2 “Manuals for This Machine”
5.
[Attach Sender’s Name]
[Attach Sub-
ject]
Set the sender and subject of the deliv-
ered document.
ered document.
5
6
1
7
2
4
3