Savin 1075 Manual Do Utilizador

Appendix

90

This section contains advice on what to do if you have problems scanning an
original or if the network delivery scanner and e-mail function do not work. Var-
ious messages that may appear on the control panel or computer are listed,
along with causes and suitable countermeasures.

The image cannot be scanned at all.

The original was placed with the front and 
back reversed. Make sure that the original ori-
entation is correct. When placed directly on 
the exposure glass, the side to be scanned 
must face down. When fed via the ADF, the 
side to be scanned must face up. 

The image is distorted or out of position.

• The original was moved during scanning. 

Do not move the original during scanning.

• The original was not pressed flat against 

the exposure glass. Make sure that the 
original is pressed flat against the exposure 
glass.

The image is scanned upside down.

The original was placed upside down. Place 
the original in the correct direction.

The scanned image is dirty.

The exposure glass or the exposure glass cover 
is dirty. Clean these parts. 

⇒Copy Reference

The delivery scanner function screen is not dis-
played.

• If the network TWAIN scanner screen ap-

pears when the machine is switched to 
scanner operation, press [Cancel] to switch 
to the network delivery scanner screen.

• If the display does not switch from net-

work TWAIN scanner to network delivery 
scanner, the delivery scanner settings are 
not correct. See p.16 “Default Settings” and 
make the appropriate settings.