Savin 2045 Manual Do Utilizador
Setting Originals
36
3
One-sided original/Two-sided
original selection
original selection
A When scanning one-sided orig-
inals, make sure that [2 Sided
Original]
Original]
is not selected.
B When scanning two-sided orig-
inals, press [2 Sided Original] to
select [2 Sided Orig.: T to T] or [2
Sided Orig.: T to B]
select [2 Sided Orig.: T to T] or [2
Sided Orig.: T to B]
according to
the binding orientation of the
original.
original.
Note
❒ When the last page of two-
sided originals is blank, se-
lect [1 Side] to skip that side
and finish scanning, or select
[2 Sides]
lect [1 Side] to skip that side
and finish scanning, or select
[2 Sides]
to scan that side as a
blank page.
❒ If [1 Side] is selected for the last
page when scanning originals
in several batches, the maxi-
mum number of pages per file
may decrease depending on
the number of batches set.
in several batches, the maxi-
mum number of pages per file
may decrease depending on
the number of batches set.
❒ If [1 Side] is selected for the
last page, the image size
might become larger than
original and may exceed the
maximum e-mail size possi-
ble. In this case, change the
settings of [Max. E-mail Size] in
scanner settings. See p.11
“Initial Scanner Setup”.
might become larger than
original and may exceed the
maximum e-mail size possi-
ble. In this case, change the
settings of [Max. E-mail Size] in
scanner settings. See p.11
“Initial Scanner Setup”.
❒ When scanning originals on
the exposure glass with the [2
Sided Original]
Sided Original]
setting, set [1 Sid-
ed Original]
for the last original.
Orientation selection
A Press the key for the same ori-
entation as the actual orienta-
tion of the original or .
tion of the original or .
SADF/Batch selection
A When scanning a large number
of originals using the ADF by
dividing the originals and
scanning them individually or
in batches, check that [SADF] or
[Batch]
dividing the originals and
scanning them individually or
in batches, check that [SADF] or
[Batch]
is selected.
Note
❒ Select [SADF] for adding orig-
inals one by one, or select
[Batch]
[Batch]
for adding the origi-
nals in batches.
❒ Select whether [SADF] or [Batch]
is displayed using the initial
scanner setting [Switch to Batch].
scanner setting [Switch to Batch].
Mixed size selection
A When originals of different
sizes are placed, make sure that
[Mixed Size]
[Mixed Size]
is selected.
Note
❒ If [Mixed Size] is not selected,
the maximum size detected
is set as the scan size. For
originals smaller than this
size, a blank space will ap-
pear in the resulting image.
is set as the scan size. For
originals smaller than this
size, a blank space will ap-
pear in the resulting image.
Top to top
original:
original:
Top to bot-
tom original:
tom original:
R S
R S
R
S
S
R