Savin 2045 Manual Do Utilizador

51

Stored scan data can be sent to a specified destination using the network deliv-
ery scanner function. This chapter explains the preparation sequence, various
display screens, delivery procedures, and how to check the delivery result when
this function is used.

❒ A delivery server in which ScanRouter V2 Lite/Professional is installed is neces-

sary to use the network delivery scanner function. Information about delivery
destinations and senders must be registered first into the delivery server. Also,
configure connected devices in [Set I/O Device] of ScanRouter V2 Administration
Utility. For more information, see ScanRouter V2 Administration Utility Help.

To use the machine as a network delivery scanner, the preparation described be-
low is required.

Connect the machine to the network with an Ethernet cable, 
IEEE 1394 (optional) cable, or connect to a wireless LAN (op-
tional).

See Network Guide.

Check the network settings in System Settings, and change if re-
quired. 

See Network Guide.

Make settings for the network delivery scanner function, such as 
Basic Settings and Subject Settings.
See p.11 “Initial Scanner Setup”.

Install the software required for using the network delivery 
scanner functions, such as ScanRouter V2 Lite, on the delivery 
server. After installing the software, make the required settings 
for server maintenance and delivery service.

See p.29 “ScanRouter V2 Lite”.

Use ScanRouter V2 Administration Utility to set the destination, 
sender information, and connected devices.

On the client computers, install the software required for view-
ing or retrieving documents by connecting to the delivery serv-
er, such as DeskTopBinder V2 Lite. 

See p.26 “DeskTopBinder V2 Lite”.

Connect to Network

Make System Settings

Make Scanner 
Settings

Install Delivery 
Software

Set Destination, Sender Information, 
and connected devices

Install Client Computer 
Software