Savin 2045 Manual Do Utilizador
Sending Stored Scan Data by E-mail
48
4
KKKK
Press the
{{{{Start}}}} key.
Note
❒ To interrupt scanning, press the
{{{{Clear/Stop}}}} key or press [Stop]
on the screen.
on the screen.
❒ When using the SADF function,
place the next original after the
others have been scanned. See
p.37 “Scanning Originals in Sev-
eral Times”.
others have been scanned. See
p.37 “Scanning Originals in Sev-
eral Times”.
❒ Regardless of the divide e-mail
size setting, it is not possible to
send e-mail containing a docu-
ment over 725.3MB. It is also not
possible to send a document
with more than 2,000 pages.
send e-mail containing a docu-
ment over 725.3MB. It is also not
possible to send a document
with more than 2,000 pages.
Simultaneous Storage and
Sending of E-mail
Sending of E-mail
You can use e-mail with the Docu-
ment Server.
Scanned data is stored in the Docu-
ment Server at the same time the data
is sent by e-mail.
ment Server.
Scanned data is stored in the Docu-
ment Server at the same time the data
is sent by e-mail.
Note
❒ This section explains mainly the
operation for simultaneous send-
ing and storage of e-mail. For more
information, see p.53 “Delivery
Procedure”.
ing and storage of e-mail. For more
information, see p.53 “Delivery
Procedure”.
❒ The data stored when simultane-
ously storing data and sending
data by e-mail cannot be resent im-
mediately after it is stored. To re-
send the data, select the data file in
the Select Stored File screen and
send it. See p.71 “Delivering or
Sending Stored Files”.
data by e-mail cannot be resent im-
mediately after it is stored. To re-
send the data, select the data file in
the Select Stored File screen and
send it. See p.71 “Delivering or
Sending Stored Files”.
AAAA
Place the original, and then adjust
the settings for original size and
orientation if required.
the settings for original size and
orientation if required.
Reference
p.31 “Setting Originals”
p.31 “Setting Originals”
BBBB
Make the basic settings.
CCCC
Select the destination.
DDDD
If required, specify the sender
(scan data delivery source) and a
subject.
(scan data delivery source) and a
subject.
EEEE
Press [Store File].
FFFF
Make sure [Send & Store] is select-
ed.
ed.
GGGG
Press [File Information] to set file in-
formation.
formation.
Reference
p.64 “Specifying file informa-
tion”
p.64 “Specifying file informa-
tion”
HHHH
Press [OK] twice.
IIII
Press the
{{{{Start}}}} key.