Savin 3310L Manual Do Utilizador
Canceling a Memory Transmission
27
2
Canceling a Memory Transmission
Before the Start Key is
Pressed
Pressed
AAAA
Press the
{{{{Energy Saver / Clear
Modes
}}}} key.
Note
❒ When you have already set the
original, you can also cancel the
transmission by removing the
original from the machine.
transmission by removing the
original from the machine.
While the Original is Being
Scanned
Scanned
AAAA
Press the
{{{{Clear/Stop}}}} key.
The machine will stop storing the
original and the data will not be
sent.
original and the data will not be
sent.
During Transmission
Use this procedure to cancel a trans-
mission after the original has been
scanned.
mission after the original has been
scanned.
Note
❒ If transmission finishes while you
are carrying out this procedure, it
will not be canceled.
will not be canceled.
❒ If you cancel a message while it is
being sent, transmission is halted
as soon as you finish this proce-
dure. However, some pages of
your message may have already
been sent and will be received at
the other end.
as soon as you finish this proce-
dure. However, some pages of
your message may have already
been sent and will be received at
the other end.
AAAA
Press the
{{{{Job Information}}}} key,
and confirm that " 1. Cancel TX /
RX " is displayed.
RX " is displayed.
The Information menu is shown.
BBBB
Press the
{{{{OK }}}} key.
StellaF1EN-3_FM.book Page 27 Monday, November 12, 2001 11:38 AM