Savin 3799 Manual Do Utilizador

Transmission Features

101

This feature is designed to help you
avoid making mistakes while scan-
ning in documents. 
If you try to scan in an almost com-
pletely blank document, an alarm
sounds after Immediate Transmis-
sion, and as soon as the document has
been scanned for Memory Transmis-
sion. 
As the alarm sounds, the screen be-
low appears.

❒ This feature is not supported in

Copy mode.

❒ Transmission is not cancelled even

if the machine detects the docu-
ment is blank.

❒ When in Memory Transmission,

you can cancel the transmission by
pressing the 

{{{{Stop}}}} key while the

message is shown on the display.

❒ You can turn Blank Sheet Detect on

or off with User Parameters. See
p.178 “User Parameters” (switch
11 bit 2).

If dirt is stuck to the scanner, the other
party receives fax messages with
black lines. When the scanner is dirty,
the warning message "

S c a n n e r

needs cleaning. Clean the expo-

sure glass.

" is displayed after scan-

ning is complete. If this message is
displayed, wipe the exposure glass
and white strip to remove the dirt,
and then press [OK].

❒ You can select whether this mes-

sage is displayed or not when the
machine detects that the scanner is
dirty with User Parameters. "On"
(Displayed) is selected by default.
See p.178 “Us er Parameters”
(switch 20 bit 7).

❒ If the dirty part of the scanner is

small, that is, 0.127 mm (0.005 in.)
or smaller, the machine tries to
erase the black line made when
scanning originals. The black line
is less visible on the received mes-
sage. However, sometimes very
small parts of the image might be
missing on the received message.
You can turn this function on or off
with User Parameters. It is turned
on by default. See p.178 “User Pa-
rameters” (switch 20 bit 4).

❒ Transmission is not interrupted

even if the machine detects that the
scanner is dirty.