Savin 9927DP Manual Do Utilizador

What to do If Something Goes Wrong

86

Copies are not sta-
pled.

There are jammed staples in 
the stapler.

Remove jammed staples. See 

❒ After removing jammed 

staples or adding staples, 
staples might not be eject-
ed the first few times you 
try to use the stapler.

The number of copies exceeds 
the capacity of the stapler.

Check the stapler capacity. 
See 

 P.38 “Staple”.

The stapler has run out of sta-
ple.

Add staples. See 

Staples are wrongly 
positioned.

Originals are not set correctly. Set originals correctly. See 

P.38 “Staple”.

Misfeeds occur fre-
quently.

Copy paper size setting is not 
correct.

Set the proper paper size. See 

You cannot combine 
several functions.

Selected functions cannot be 
used together.

Refer to the combination 
chart. See 

.

In Center/Border 
mode, parts of the 
original image are not 
copied.

The margin is too wide.

Set a narrower margin with 
the user tools. See “01. Border 
Erase Width” in 

. See “02. 

Center Erase Width” in 

P.121 “2. Adjust Image 1/3”.

Your original has narrow 
margins on four sides.

In Image Repeat 
mode, the original im-
age is not copied re-
peatedly.

You selected the same size 
copy paper as originals, and 
did not select the proper re-
production ratio.

Select copy paper larger than 
the originals. See 

.

Select the proper reproduc-
tion ratio. See 

.