Savin 3150eDNP Manual Do Utilizador

If Your Machine Does Not Operate As You Want

81

❖

❖

❖

❖ When one of the following messages is displayed on the guidance display

-

-

-

-When a service code (E-XX) is displayed in the guidance display

Turn the main switch off and on. If a service code appears again, contact your
service representative.

❒ If a service code appears on the guidance display after you turn the main

switch off and on a few times, do not continue turning it on and off. Leave the
machine off.

❒ E04 might be displayed when you make masters continuously using the orig-

inals that have solid images. In the case, turn off the main switch and wait for
a while.

RE-ENTER COPY NUMBER MAXIMUM 

IS XXX

The maximum number of prints that can be 
entered is specified by the Service Program 
mode. Change the number of prints.

RE-ENTER COPY NUMBER MINIMUM 

IS XXX

The minimum number of prints that can be en-
tered is specified by the Service Program 
mode. Change the number of prints.

SET THE ORIGINALS

Make prints after you confirm whether there is 
an original.

INPUT YOUR ID CODE

User Code mode is set. Before printing, enter 
your user code.

NO ADDITIONAL PRINTS ALLOWED

Security mode is set. If you make the next mas-
ter, Security mode is canceled.

MASTER MAKING HALTED 

Master making is halted.

Press the 

{Start} key.