Savin 3150eDNP Manual Do Utilizador
User Codes
63
3
key.
F
Press the
{{{{Clear Modes}}}} key to
leave Service Program mode.
How To Use User Code Mode
A
Input your assigned 3-digit user
code with the
code with the
{{{{Number}}}} keys, then
press the
{{{{#}}}} key.
B
Make your prints.
C
After you have finished, press the
{{{{Clear/Stop}}}} key while holding
down the
down the
{{{{Clear Modes}}}} key.
Note
❒ This prevents others from mak-
ing prints using your user code.
❒ If you do not follow this step,
the machine will not request the
next user for their codes unless
the auto reset time has expired.
next user for their codes unless
the auto reset time has expired.
How To Check The User Code
Counter (# 121)
Counter (# 121)
Reference
If you want to check the total mas-
ters and prints made under all user
codes, see
ters and prints made under all user
codes, see
⇒
P.65 “How To Check
The Total Number Of Masters And
Prints Made Under All User Codes (#
123)”.
Prints Made Under All User Codes (#
123)”.
A
Press the
{{{{Clear Modes}}}} key.
B
Hold down the
{{{{Clear/Stop}}}} key
TSLS011N
TSLS01UN
TSLS011N
TSLS01SN
TSLS01UN