Savin 4018 Manual Do Utilizador
Where to Put Your Machine
59
5
Moving
R CAUTION:
R CAUTION:
Important
❒ Be careful when moving the ma-
chine. Take the following precau-
tions:
• Turn off the main power. See
tions:
• Turn off the main power. See
p.13 “Turning Off the Main
Power”.
Power”.
• Unplug the power cord from
the wall outlet. When you pull
out the plug from the socket,
grip the plug to avoid damag-
ing the cord, thereby reducing
the risk of fire or electric shock.
out the plug from the socket,
grip the plug to avoid damag-
ing the cord, thereby reducing
the risk of fire or electric shock.
• Close all covers and trays, in-
cluding the front cover and by-
pass tray.
pass tray.
❒ Do not take off the holding stand.
❒ Protect the machine from strong
❒ Protect the machine from strong
shocks. Impact can damage the
memory.
memory.
Power Connection
R WARNING:
R CAUTION:
R CAUTION:
• When the main power switch is in
the stand-by position, the optional
anti-condensation heaters are on.
In an emergency, unplug the ma-
chine's power cord.
anti-condensation heaters are on.
In an emergency, unplug the ma-
chine's power cord.
• When you unplug the power cord,
the anti-condensation heaters turn
off.
off.
• Make sure the plug is inserted
firmly in the wall outlet.
• Voltage must not fluctuate by
more than 10%.
• The wall outlet shall be installed
near the machine and shall be eas-
ily accessible.
ily accessible.
• Unplug the power cord from the
wall outlet before you move the
machine. While moving the ma-
chine, you should take care that
the power cord will not be dam-
aged under the machine.
machine. While moving the ma-
chine, you should take care that
the power cord will not be dam-
aged under the machine.
• Before moving the machine, be
sure to pull all four handles fully
out. If not, an injury might occur.
After moving the machine, return
the four handles to their original
positions.
out. If not, an injury might occur.
After moving the machine, return
the four handles to their original
positions.
• When the optional paper tray unit
is installed, do not push the up-
per part of the main unit horizon-
tally. An injury might occur if the
paper tray unit becomes de-
tached from the main unit.
per part of the main unit horizon-
tally. An injury might occur if the
paper tray unit becomes de-
tached from the main unit.
• Connect the machine only to
the power source described on
the inside front cover of this
manual. Connect the power
cord directly into a wall outlet
and do not use an extension
cord.
the inside front cover of this
manual. Connect the power
cord directly into a wall outlet
and do not use an extension
cord.
• Do not damage, break or make
any modifications to the power
cord. Do not place heavy ob-
jects on it. Do not pull it hard
nor bend it more than neces-
sary. These actions could
cause an electric shock or fire.
cord. Do not place heavy ob-
jects on it. Do not pull it hard
nor bend it more than neces-
sary. These actions could
cause an electric shock or fire.
• Unplug the power cord from the
wall outlet before you move the
machine. While moving the ma-
chine, you should take care that
the power cord will not be dam-
aged under the machine.
machine. While moving the ma-
chine, you should take care that
the power cord will not be dam-
aged under the machine.
• When you disconnect the power
plug from the wall outlet, always
pull the plug (not the cable).
pull the plug (not the cable).
KirC2_ENcopyF_FM.book Page 59 Monday, September 22, 2003 11:36 AM