MicroNet Technology SP756 Manual Do Utilizador

 

45 

1.  Optionally, assign a name corresponding to the print server’s IP 

address.  You can add this address to the /etc/hosts file, by adding a 
line such as: 

203.66.191.12  

pserver 

2.  Add an entry to the host’s /etc/bootptab file, similar to the following: 

hostname:\ 

 :ht=1:\ 

 :ha=print_server_ethernet_address:\ 

 :ip=print_server_ip_address: 

Lines should be indented with tabs. 

Where hostname is the device name of a print server, the ht=1 tag 
specifies the hardware type is Ethernet, the ha= tag specifies the Ethernet 
address of a print server, which is the Node ID located on the print server. 
The ha tag must be preceded by the ht tag. The ip= tag should 
correspond to the IP address you want to assign to the print server. 

For example, a print server with the following configuration: 

Node ID: 0000B4010101 (this implies Ethernet 

address is 0000B4010101), 

IP address: 203.66.191.12 

The entry for this print server in the /etc/bootptab file should be:  

PS010101:\ 

:ht=1:\ 

:ha=0000B4010101:\ 

:ip=203.66.191.12: