Mustek PP7000 Manual Do Utilizador

 

The Aura thermal printer supports all commands applicable 

to Epson printer TM-T88II. The only difference is the 
smoothening command in enlarged text fonts. Please visit our 
web site http://www.posiflex.com.tw,  http://www.posiflextw.com, 
http://www.posiflexuk.com or http://www.posiflexusa.com for 
detail description of the supported commands if required. 

Following commands are included in the printer firmware 

version since ver. 3.2: 

ESC ‘o’: Beep command 
GS ‘o’ m: Beep definition (0 < m ≦ 16, default 3 seconds) 
ESC ‘p’ m n1 n2: Cash drawer kick or kitchen bell drive 

command 

GS ‘p’ m n: Beep when cash drawer remain open (0 < m < 

256, n = ‘0’ or ‘1’) 

 
Explanations as below: 
 
ESC ‘o’: Beep command 
Hexadecimal codes are: 1B 6F 
Printer beeps when this command is received per condition 

set by beep definition. 

 
GS ‘o’ m: Beep definition (0 < m ≦ 16, default 3 seconds) 
Hexadecimal codes are: 1D 6F m 
This command defines length of beep as m seconds when 

beep command is received. When m = 0, default applies. 

 

 

5 - 5