IBM 1xR Manual Do Utilizador
Status byte 10
Table 23. Status byte 10
Bit
Description
0 (LSB)
Reserved
1
Electronic journal suspend (see driver spec for electronic journal support)
2
Set when responding to checksum request for download graphics logos or
stored messages.
stored messages.
3
Reserved
4
Reserved (Always = 0)
5
Reserved
6
Reserved
7 (MSB)
Reserved
Status byte 11
Table 24. Status byte 11
Bit
Description
0 (LSB)
CR feed error - no motion detected when line feeding.
1
Reserved
2
Detected partial paper cut. Cutter may be failing.
3
Unexpected cover open. This bit will be set when the cover is open,
where there isn't an error condition.
where there isn't an error condition.
4
Reserved (always = 0)
5
Cutter jam. CANNOT print in the CR station when this bit is set.
6
Set to 1 when CR paper is low.
7 (MSB)
Set to 1 when CR paper is critically low.
Status byte 12
This will contain information RMA should monitor.
Table 25. Status byte 12
Bit
Description
0 (LSB)
Reserved
1
Document feed slip detected. Document
does not appear to move as far as it should
when feeding. Tested during MICR read and
landscape print.
does not appear to move as far as it should
when feeding. Tested during MICR read and
landscape print.
2
Reserved
3
Unexpected DI cover open. This bit will be
set when the cover is open and there has not
been an error.
set when the cover is open and there has not
been an error.
4
Reserved (Default = 0)
5
High voltage detection. The printer will be
offline if this bit is set.
offline if this bit is set.
6
Reserved
Chapter 5. Status information
93