Zebra Technologies S400 Manual Do Utilizador

Zebra S400 & S600 User’s Guide

51

3ULQWHU6WDWXV6HQVRUV

The printer contains several status sensors.  These sensors alert the 
operator to various conditions by either stopping the printing or turning on 
an LED.

Printhead sensor

Checks the open/closed 
status of the printhead lever.

If the printhead is open, the 
PRINTHEAD LED flashes.

Media sensor 

(See page 18 to adjust 
this sensor.)

Checks for proper media 
loading.

If you run out of paper, the  
PAPER/RIBBON LED turns on.

If non-continuous media is 
used, sets label length for 
individual labels.

Ribbon sensor

Monitors the presence of 
ribbon.

If you run out of ribbon, the 
PAPER/ RIBBON LED flashes.

Label available sensor 
(Peel-Off option 
required.  See       
Figure 25.)

In Peel-Off mode, it checks to 
see if a label is available.

Once a label prints, it passes 
between the two parts of this 
sensor and causes the printer to 
pause.  When the label is 
removed, printing resumes.

Backing rewind spindle 
full sensor (Peel-Off 
option required.  See 
Figure 26.)

Senses when the backing 
rewind spindle is full of used 
backing material.

When the spindle is full, the 
PAPER/RIBBON LED flashes.