Psion Teklogix PX750 Manual Do Utilizador

•

Remove the battery, and clean the contacts on the battery and the charge well. 

•

Inspect the charge well contacts for damage (are they bent, flattened, twisted or broken).

•

Try inserting a battery that you know to be working in the charge well. 

•

Reconnect the power cable, and check that the charge well indicator flashes at powerup.

The desktop docking station can be connected to a PC so that you can exchange files or 
install applications. A USB cable is included with your docking station.

To link NEO to a PC:
•

Insert the hand-held in the desktop docking station.

•

Insert the micro-USB connector into the docking station connector. Attach the other end 

of the cable into a USB port on the PC.

A micro-USB Ethernet adaptor cable – model number PX3052 – is used to connect NEO to 
an Ethernet network through a desktop docking station.
•

Insert the micro-USB connector on the adaptor cable into the micro-USB port on back 

the desktop docking station.

•

Connect your network Ethernet cable to the Ethernet port on the adaptor cable.

The hand-held unit automatically detects insertion into the desktop dock and loads the ap-
propriate drivers to communicate with the micro-USB Ethernet converters.

Network Addressing
The host application uses standard TCP/IP protocol to name, locate and communicate with a 
specific NEO on the network. 
If a link is established between a NEO and a host, the application on the host and on the 
hand-held must have a recovery mechanism in the event that NEO is removed from the 
dock, interrupting the link.