Psion Teklogix PX750 Manual Do Utilizador

Keep in mind that the application running on NEO can dictate how the LED operates. 
Review the documentation provided with your application to determine LED behaviour. 
The scanner also overrides LED behaviour. The table below describes what the various LED 
colours indicator when a scan is activated – a scanner button is pressed or the scanner trigger 
is pulled.

If the unit is attached to an external power supply, the hand-held LED reflects the battery 
charge status.

The audio receiver provides a variety of sounds when a key is pressed, a keyboard character 
is rejected, scan input is accepted or rejected, an operator’s entry does not match in a match 
field or the battery is low. To specify how you want your NEO to respond under various con-
ditions, refer to “Volume And Sound Properties” on page 90.

Table 3.1  NEO Scanner LED Behaviour

LED Behaviour

Scan Status

Solid Red

Indicates the scanner is firing.

Blinking Red

Unsuccessful decode.

Solid Green

Successful decode.

Table 3.2  NEO Charge LED Behaviour

LED Behaviour

Charge Status

Solid Yellow

Battery charged to less than 75% capacity.

Flashing Green

Battery charged to between 75% and 95% of capacity.

Solid Green

Fully charged.

Flashing Yellow

Temperature outside charge range (0°C to 45°C).

Solid Red

Battery is not charging. Battery fault warning.