ASUS ET2321I Manual Do Utilizador

20

All-in-One PC ET232 Series

The On Screen Display (OSD) menu will display when you:
1.  Press the Menu button on the front panel.
2.  Connect an HDMI cable to the rear HDMI input port.

To display the OSD menu, press the Menu button on the front panel. To navigate through the 

OSD functions or modify OSD settings, press the Menu Up or Menu Down keys on the front 

panel. To activate the selected function, press the Menu button again.

NOTE:  Refer to the section Getting to know your All-in-One PC for the location of the front 

panel buttons.

Press this button to switch off the display.

 - Brightness: This setting can be adjusted using values between 0 to 100.
 - Contrast: This setting can be adjusted using values between 0 to 100.
 - Color Temp. : Four color modes are available - Cool, Normal, Warm, and User mode.

 - Sharpness: This setting can be adjusted using values between 0 to 100.
 - Aspect Control: Select the aspect ratio to “Full” or “OverScan”. This setting is available 

only when you use the All-in-One PC as a standard desktop LCD monitor.

 - Auto Adjust: Adjusts the horizontal position (H-Position) and the vertical position 

(V-Position) of the display. This feature is available only when you use the All-in-One PC 

as a standard desktop LCD monitor.

 - PC: Displays video produced by the All-in-One PC.
 - HDMI: Display video input from the HDMI Input port.