Siemens 620 Manual Do Utilizador

4-17

SIMATIC Box PC 620  Manual

A5E00131465-01

1. Undo the 4 screws on the back of the housing.
2. Open the drive holder.
3. Detach the drive holder from the mounting and lay  the drive holder with its top

on the housing.

4. Note the cable assignment and pull off the cables.
5. Undo the four screws which secure the hard disk drive to the vibration-damped

part of the mounting. Remove the hard disk drive from the mounting.

6. Proceed in the reverse order to fit the new drive. The new drive must be of the

same type as the one removed.

Fixing screws

Figure 4-12 Installation and Removal of the Drive Holder